How to Enable XMP on an AMD Board

Help with AMD overdrive? Freeze issues Hey, new to the forums here be gentle! It was locked, so i decided i would unlock the settings and figure it out for myself.
enable amd overdrive

Fresh Load – Cannot Enable AMD Overdrive

The type of settings that are available vary between systems: Settings for overclocking the graphics processor are available for systems installed with at least one AMD graphics card that supports GPU overclocking. Settings for both pages can be enabled and disabled through a master control on the AMD OverDrive page. You should also make sure that you are using high-quality system components to ensure maximum system stability.

The following procedure describes how to use the page to control which AMD OverDrive technology settings are enabled for systems that support CPU and graphics overclocking. Graphics OverDrive—Enables or disables only settings for overclocking the graphics processor.

To configure overclocking features, click the appropriate link: Configure Graphics OverDrive—Opens the Graphics OverDrive page, which contains settings for controlling the performance level of graphics processors. The availability of pages vary depending on the AMD OverDrive technology settings that are available for your system. When overclocking the graphics processor, use the various gauges and indicators on the page to assess the system stability.

They are provided to help you optimize the graphics processor without overheating or overworking it. If your system supports only graphics overclocking, navigate to the AMD OverDrive page using the following groups. Advanced View—Performance. The current performance settings of the GPU is shown on the page. If your system is not a notebook that is running solely on battery, the maximum GPU and memory clock settings for your graphics processor are also shown on the page.

GPU performance settings are available only for systems installed with at least one graphics processor that supports GPU overclocking. Click Apply. If the settings are enabled, the selected performance settings are automatically applied to the GPU. If the settings are disabled, the GPU uses default factory performance settings. A lower power limit allows for a cooler and quieter running system but may reduce GPU performance.

Note that performance and power vary between applications. This slider is not available for all graphics cards. From the list, select the desired displaying or rendering graphics card. Specify the desired power limit value using the heat map or the Power limit settings field. Clock speeds are shown on the y-axis and range between the slowest and highest clock speeds that are supported by your graphics processor. You may be able to optimize the performance of your graphics processor by running it at a higher clock speed.

Custom clock speeds are not available for notebooks running solely on battery power. Take extra caution when increasing the GPU clock speed, as higher speeds result in higher temperatures and may cause the graphics card to fail.

Click Apply to accept the new clock settings. Adjusting Graphics Memory Clock Speeds Use the following procedure to enable or disable custom graphics memory clock speeds for your GPU as the need arises.

Move the High Performance memory clock settings slider to the desired setting. The lower limit is the lowest speed that can be supported by the GPU. The upper limit is the highest speed that can be set for the GPU. Take extra caution when increasing the speed, as higher speeds result in higher temperatures and may cause the graphics card to fail.

This setting is not available for all graphics cards. The graphics card will dynamically change the performance and fan speed to maintain your selected temperature. Adjusting the Fan Speed By default, the fan speed for your GPU is automatically adjusted to an optimal level to avoid overheating.

However, you can manually change the fan speed if the need arises. To keep the GPU as cool as possible when clocks are at their highest level, raise the fan speed; to reduce noise, lower the fan speed. This feature is available only for graphics cards that have variable speed fans. Move the Fan Speed slider to the desired setting. Adjusting the fan speed may reduce the lifespan of the graphics processor fan.

If the GPU gets too hot at the speed selected, the fan is automatically raised to a higher speed until the GPU reaches a safe temperature. Once a safe temperature is reached, the fan speed reverts to the speed selected. If a warning message dialog box appears, click OK to accept the new fan speed.

The Fan Speed indicator shows the current fan speed, which is typically the speed selected unless the fan speed is automatically raised to cool the GPU. To restore default clock settings for the selected GPU, do one of the following: This option is not available for notebooks running solely on battery.

Repeat this procedure as many times as necessary for each GPU that you want to reset. Forcing Maximum GPU Performance Clock Speeds 2D applications and 3D applications operating in windowed mode run at 2D clock speeds, which are typically lower than the clock speeds used for full-screen 3D applications. Using the Force Maximum Performance Clocks option, you can force all applications to run at current 3D clock speeds in order to maximize graphics performance.

The availability of this feature varies between graphics cards. Once performance levels have been determined, you can manually set your CPU to the one that best suits your needs. A performance level is a combination of the CPU clock speed, core voltage, and multiplier. When done correctly, overclocking can help you maximize the capabilities and increase the performance of your CPU. Auto-Tune is a test tool that finds performance levels by gradually increasing the clock speed and core voltage of the CPU and testing for system stability.

If at least one acceptable performance level is found, you can manually set your CPU to any of the levels. If no performance levels are found or if Auto-Tune cannot complete, no overclocking changes are made. The availability of settings in the page varies depending on results from Auto-Tune. Select the Override existing CPU settings check box. Selecting the check box allows you to ignore the CPU settings that are currently used by your system when you run Auto-Tune. Click Auto-Tune.

If needed, review the warning that appears and click OK to continue. The clock speed and voltage currently being tested are shown in the dialog box, along with the progress of the test and the number of performance levels found. To stop the test, click Stop. Restart your system.

If Auto-Tune completes and more than one performance level is found, the highest level is shown, and you are prompted to restart your computer. You must restart your system before the performance levels become available for selection on the page. If Auto-Tune cannot complete or only one performance level is found, a message appears notifying you of the test result, and you are prompted to restart your system. No overclocking changes are made to the CPU. If the settings are enabled, the selected performance level is automatically applied to the CPU.

If the settings are disabled, the CPU is returned to the default factory performance level. Select the appropriate performance level. Typically, the higher performance level, the greater the CPU performance. If there is only one performance level available, use the check box to select the level. The CPU clock speed, multiplier, and core voltage are adjusted according to the selected performance level.

Found a mistake?

AMD OverDrive

The type of settings that are available vary between systems: Settings for overclocking the graphics processor are available for systems installed with at least one AMD graphics card that supports GPU overclocking. Settings for both pages can be enabled and disabled through a master control on the AMD OverDrive page. You should also make sure that you are using high-quality system components to ensure maximum system stability. The following procedure describes how to use the page to control which AMD OverDrive technology settings are enabled for systems that support CPU and graphics overclocking.

VIDEO: How to Disable an ATI Overdrive | It Still Works

Got my a apu with radeon HD cant enable the gpu overdrive pls help just clicks and goes back to default off). Extreme Memory Profile enables motherboards to overclock Double Data Rate III, or DDR3, memory Enable this option in the BIOS or through AMD OverDrive. The AMD OverDrive overclocking software allows you to overclock BY OVERCLOCKING, EVEN WHEN ENABLED VIA AMD SOFTWARE.

Leave a Reply

Your email address will not be published. Required fields are marked *